Work continues to get the car ready for the Old Skool Ford Drag Championship 2013. Unfortunately, we did not make Round 2. However, new ARP bolts arrived on time and the engine has been rebuilt and installed back into the car despite the rain. Only bellhousing and engine mount bolts fixed at the moment. Check for updates coming soon.
Thursday, 02 May 2013 00:21
Old Skool Ford Drag Championship 2013 - here we come. Covers off, engine out and modifications to be fitted. No time to finish bodywork, racing must be had :) Round 1 missed, can we get to Round 2? Check for updates coming soon.
Thursday, 28 February 2013 20:57
It was time to incease my sanding tool set.
What we have here is a Long bed flexible sandng block which takes 420mm x 70mm hook and loop paper, a Teardrop sanding block and a 75mm DA Sander. No excuses now!
Thursday, 28 February 2013 20:49
Air Induction cowl
Project Front End! is coming along. The air induction cowl has been fabricated and initial blending in work has been completed. A couple of light coats of etch primer have been applied to see what needs to be fined tuned before the bonnet gets stripped down ready for primer.
Click here for updates on the making of fibreglass panels and here for the front end contruction.